WiMoSpeed v1.08 pocketpc cabRequirements: PPC WM6
Overview: WiMoSpeed lets you change the CPU-speed. In opposite to other tools, even to the predecessor OverClockTool (OCT), it manipulates the values WM uses for clock control. So it works reliable on battery and AC without any scripting or active components.
Usage:
- Download and install the CAB.
- Start WiMoSpeed.exe. If it reports that it cannot identify your ROM: read LIMITATIONS/PROBLEMS.
- Select Speed.
- Set Speed.
- Exit WiMoSpeed.exe.
- Your device still runs with speed you set.
Auto start WiMoSpeed to desired speed:
Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.
1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
3. Copy that lnk file to the "/Windows/Start Up" folder.
4. Reboot device.
5. Run WiMoSpeed to verify "current CPU speed" is correct.
Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.
1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
3. Copy that lnk file to the "/Windows/Start Up" folder.
4. Reboot device.
5. Run WiMoSpeed to verify "current CPU speed" is correct.
Limitations:
WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of:
- Rhodium.
- RhodiumW.
- Topaz.
- Blackstone.
- Whitestone / Imagio.
- Raphael / Fuze.
- Diamond.
- Kovsky / Xperia.
- Quartz.
- Pure.
WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of:
- Rhodium.
- RhodiumW.
- Topaz.
- Blackstone.
- Whitestone / Imagio.
- Raphael / Fuze.
- Diamond.
- Kovsky / Xperia.
- Quartz.
- Pure.
Technique:
Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.
Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.
Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.
Update Description:
WiMoSpeed v1.08 cab
- Added support for more OEMXIPs (1 x Diamond, 1 x Blackstone).
- Added support for more RADIOs (0.93.25.NS16, 1.02.25.32, 1.10.25.18, 1.11.25.71, 1.11.25.76).
WiMoSpeed v1.08 cab
- Added support for more OEMXIPs (1 x Diamond, 1 x Blackstone).
- Added support for more RADIOs (0.93.25.NS16, 1.02.25.32, 1.10.25.18, 1.11.25.71, 1.11.25.76).
Free WiMoSpeed v1.08 pocketpc cab
0 comments:
Post a Comment